Every day, many workers have to deal with both the inconvenience and the danger of working in confined spaces. These confined spaces present some of the most dangerous working conditions across industries such as manufacturing, construction, utilities, municipalities, petrochemical facilities, food processing, and wastewater treatment. The conditions surrounding these confined spaces can result in accidents and dangerous incidents. Many confined space incidents occur because employers underestimate atmospheric hazards that cannot be seen, smelled, or detected without proper monitoring equipment.
OSHA requires employers to evaluate confined spaces, identify hazards, and implement appropriate safety procedures before workers enter permit-required confined spaces. There are three primary atmospheric hazards every employer should understand, especially those sending workers to confined spaces. This article will provide an overview of each of these atmospheric hazards, as well as discuss why proper training is essential for preventing serious injuries and fatalities.
Table of Contents
What is Confined Space?
Confined spaces are workplace areas that are just large enough for one worker to fit in, and there’s typically only one way in or out. OSHA’s general characteristics for an atmospheric hazard confined space include:
- Large enough area for an employee to enter and perform work
- Limited means of entry and exit
- Not designated for continuous occupancy
What is Permit-Required Confined Space?
To be considered a permit-required confined space, the confined space must meet OSHA’s three criteria for a confined space and have the potential for health or safety hazards. These are spaces that are not meant for continuous work. Characteristics of permit-required confined spaces include:
- Hazardous atmosphere (little oxygen or a presence of toxic gases)
- Potential engulfment hazards (loose materials that could bury or drown someone)
- Internal configuration hazards (the shape of the space could make it uncomfortable or dangerous)
- Other recognized serious safety hazards (exposed wires, moving machine parts, extreme temperatures)
Examples of permit-required confined spaces include:
- Storage tanks
- Silos
- Vaults
- Manholes
- Sewers
- Pipelines
- Utility vaults
- Boilers
- Process vaults
Why Atmospheric Hazards Are the Leading Cause of Confined Space Fatalities
Working in an atmospheric hazard confined space opens workers up to potential dangers. One of the most common dangers workers in these spaces deal with is atmospheric hazards. With such a small space to work with, there’s less air to breathe, making it easier to be overwhelmed by toxic gases or surrounded by a flammable atmosphere. In these confined spaces, it’s also harder to get oxygen, leading to dizziness and fainting.
Atmospheric hazards aren’t always easy to recognize. Workers may not see or smell a problem before the air becomes dangerous, and conditions can change quickly once work begins. Instead of relying on their senses, workers need appropriate atmospheric testing to determine whether the space is safe. Continuous monitoring may also be necessary when conditions can change during the job. The danger doesn’t end when someone needs to be rescued, either. Unprotected rescuers can become victims themselves if they enter a hazardous space without the right training and equipment.
According to the Bureau of Labor Statistics, Census of Fatal Occupational Injuries, 1,030 U.S. workers died from occupational injuries involving a confined space between 2011 and 2018.
The 3 Main Atmospheric Hazards in Confined Spaces
While many hazards can be associated with working in a confined space, three main atmospheric hazards threaten workers’ health and safety.
1. Oxygen Deficiency (Too Little Oxygen)
The human brain relies on a steady supply of oxygen to work properly. The normal amount of oxygen concentration to breathe in is 21% by volume. When oxygen levels drop below 20%, our bodies begin to experience problems related to oxygen deficiency. In confined spaces, workers are exposed to industrial hazards that can cause oxygen deficiency. These include inert gases that can leak and fill up confined spaces, as well as chemical reactions that cause fires or other reactions that take away oxygen. These chemical reactions also lead to the rusting of iron structures, which creates additional safety hazards in confined spaces.
Signs and Symptoms
Immediate health issues related to oxygen deficiency include dizziness, fatigue, confusion, poor muscle coordination, nausea, loss of consciousness, brain damage, and even death. People begin to see these symptoms and consequences when oxygen levels in the blood and tissues drop way too low.
Why Oxygen Deficiency is So Dangerous
What makes oxygen deficiency so dangerous for workers is the fact that low air quality can quickly cause debilitating health issues. Initially, oxygen deficiency can begin to cause mental confusion and a sudden loss of muscle control, almost like you haven’t slept in days. That will lead to the next major issue, which is a worker suddenly losing consciousness. Since oxygen deficiency is a silent hazard, there are no warning signs that indicate an issue with losing oxygen. You will keep breathing normally until breathing in that depleted air finally causes you to pass out.
2. Toxic Gases and Vapors
Confined spaces make it easier for workers to come into contact with toxic gases that can quickly cause major trouble. Toxic gases fill the tight airspace with airborne chemicals that can make workers feel ill. These hazardous gases can lead to tissue damage or even death. Common hazardous gases workers need to worry about in confined spaces include:
- Hydrogen sulfide (H₂S)
- Carbon monoxide (CO)
- Chlorine
- Ammonia
- Solvents
- Industrial chemicals
Common Sources
- Wastewater systems: If workers are overwhelmed by a rotten egg smell in a confined space, it’s likely hydrogen sulfide released by a wastewater system. This can happen when organic materials decay inside sewers. Waste from these wastewater systems can also produce methane that builds up and potentially causes fires.
- Chemical processing: When certain chemicals mix together in an atmospheric hazard confined space, they create harmful byproducts, such as chlorine or phosgene. The fumes from these byproducts can be quite dangerous.
- Fuel-powered equipment: Certain equipment that runs on fuel can produce dangerous gases that can overwhelm and overpower when released in a confined space. For example, certain generators and engines produce carbon monoxide that is colorless and odorless, making it impossible to notice it filling your lungs. You will, however, notice nitrogen oxides from heaters and gas motors that burn your eyes.
- Industrial cleaning: Many industrial cleaning materials trigger intense physical reactions because of the toxic fumes they contain. For example, the vapors of paint removers can cause dizziness and breathing problems.
- Manufacturing: The manufacturing process of many industries results in the release of metal fumes. There’s also the risk of storage tanks leaking harmful materials like ammonia or sulfur dioxide.
Health Effects
Not only do dangerous vapors make it hard to work comfortably in an atmospheric hazard confined space, but they also leave some long-term effects that you might have to deal with for years to come.
Breathing in dangerous chemical fumes can result in respiratory irritation that makes it difficult to breathe easily. There are neurological effects to worry about with inhaling toxic gases, such as headaches, nausea, cognitive impairment, and motor control issues.
Long-term exposure effects include brain damage, memory loss, insomnia, depression, anxiety, and peripheral nerve damage. You may also feel the effects of chemical poisoning as a result of exposure.
3. Flammable or Explosive Atmospheres
The last of the three big risks to consider with an atmospheric hazard confined space is the potential for fire or an explosion. Many workers will find themselves working with materials that are highly flammable or combustible. The potential for an explosion is always present. Some of the flammable or explosive materials that could be found in a confined space are:
- Methane
- Gasoline vapors
- Solvents
- Propane
- Natural gas
- Hydrogen
Issues like organic decay, fuel tank leaks, combustible dusts, or gas leaks could all create hazardous conditions inside confined work spaces.
Lower Explosive Limit (LEL)
Lower Explosive Limit (LEL) is a concept for measuring just how little gas or vapor is necessary in the atmosphere for an ignition source to cause a fire or explosion. It’s a basic calculation of the minimum concentration of gas volume in the air that would be at risk of igniting. Any amount below this minimum concentration is considered “too lean” to ignite.
Gas monitoring is critical to tracking the LEL limit because it identifies when the minimum concentration of gas volume has been exceeded, and the atmosphere is at risk for ignition.
Common ignition sources to be aware of once the LEL reaches a dangerous concentration include electrical sparks, open flames, and hot surfaces.
Preventing Fires and Explosions
Certain steps can be taken to prevent workplace fires and explosions. These steps include proper ventilation to move gas and vapors out while fresh air moves in; gas testing that makes sure the air is safe to breathe and free of dangerous vapors; intrinsically safe equipment that doesn’t spark; and hot work permits that are issued following inspections of work areas where welding, cutting, or burning will take place.
How Employers Can Identify Atmospheric Hazards Before Entry
The best thing employers can do before sending workers into a confined workspace is to test the space for any gases or vapors, as well as contaminants in the air. They should also check the oxygen levels to make sure the space is breathable. This can be done using a gas monitor that tests the atmosphere. Learn more about how employers can identify hazards inside an atmospheric hazard confined space.
Atmospheric Testing
Pre-entry atmospheric testing can be done using gas detectors to check for oxygen levels, flammable gases, and toxic contaminants. This will be followed by continuous monitoring to check atmospheric levels and ensure that it’s safe for workers to enter for work. The best way to handle atmospheric testing is with a multi-gas detector that tracks oxygen levels, lower explosive limits, and the potential presence of hydrogen sulfide and carbon monoxide.
Ventilation
Ventilation can be used to track air quality before and during the use of forced-air ventilation by employers. As air is forced in from outside, gas monitors can be used to detect oxygen levels, flammable vapors, and toxic contaminants now in the air. There should be some evidence that air circulation is helping to ensure safe, breathable air. Effective ventilation systems can help to remove accumulations of toxic gases and other contaminants that create a hazard inside confined spaces.
Hazard Assessments
Hazard assessments can be done to check a workspace for hazardous atmospheric conditions before sending workers inside a workspace. Key steps include job hazard analysis, risk assessments, and permit procedures. Review past records before testing the air to identify its current condition.
OSHA Requirements for Confined Space Safety
OSHA requires that employers take special precautions before allowing workers to enter confined spaces. Employers must follow certain safety rules for an atmospheric hazard confined space to be deemed safe for entry. Employers must identify and label all permit-required confined spaces and test the air for contaminants and oxygen levels. The requirements for confined space safety include:
- Written confined space program
- Entry permits
- Atmospheric testing
- Rescue planning
- Employee training
- PPE
- Attendant responsibilities
- Entry supervisor responsibilities
Common Employer Mistakes That Increase Confined Space Risk
By failing to take the proper precautions ahead of sending employees into a confined space, you run the risk of major hazards like toxic gas exposure, oxygen deprivation, and combustibility. Failing to take the proper precautions puts your employees at risk of injury, illness, or even death. The most common mistakes that could increase risk in an atmospheric hazard confined space include:
- No atmospheric test is performed before entry. This can leave workers unaware of dangerous changes in oxygen levels or airborne contaminants.
- The space appears safe, so workers overlook testing. A lack of odor or visible warning does not mean the air is safe to breathe.
- Ventilation is overlooked when conditions call for it. Without adequate airflow, hazardous gases may accumulate inside the space.
- Providing limited or outdated employee training.
- Using gas monitors that are overdue for calibration.
- Allowing workers to enter without proper authorization.
- Using the same safety procedures for every confined space, even when the hazards differ.
Industries Most at Risk
Certain industries face higher risk than others for confined-space incidents. Typically, these are industries where workers are entering confined, narrow areas like tanks, silos, sewers, underground vaults, and pipelines. Specifically, these are some of the most at-risk industries for atmospheric hazards in confined spaces:
- Manufacturing
- Construction
- Oil & Gas
- Chemical Processing
- Utilities
- Wastewater Treatment
- Municipal Services
- Food Processing
- Agriculture
- Maritime
Why Confined Space Training Matters
Any precaution that can help keep your employees safe from danger is essential to business owners in many industries. You can expect better results when your employees know what to do in difficult or dangerous situations. For businesses that work with confined spaces, training is important for helping employees know how to handle work in a confined space and how to take all the proper safety precautions to prevent disaster.
Atmospheric hazard confined space training is important to help keep your business in compliance with OSHA regulations, which are the major safety procedures to follow for businesses in the United States. They also help those overseeing the workplace recognize the different hazards that come with a confined space.
For your workers, training will help them understand proper equipment used to prevent accidents and mistakes in a confined space. You should also have your team prepared for a rescue situation and make them aware of what needs to be done in an emergency.
Confined space training is proven to help raise awareness about potential hazards in a confined space, as well as reduce injuries that are common in these spaces. These training sessions will help to improve emergency response while increasing employer confidence in going to work in a confined space.
How AOTC Helps Employers Improve Confined Space Safety
If you’re running a business that sends employees to work in confined spaces, you need to make sure your workers are ready to handle such difficult and dangerous tasks. The way to make sure everyone can be safe and productive in a confined space job is to provide regular training to deal with hazards such as oxygen deficiency, toxic gases, and risks of explosions. Working with an experienced Confined Space Training partner is the best thing you can do to prepare your business for work in an atmospheric hazard confined space.
Alpha-Omega Training and Compliance, Inc. is a trusted choice for confined space awareness training that helps workers and management safely perform work in high-risk confined spaces. This training includes permit-required confined space training and competent person training.
Our space entry training program helps your team identify safety hazards in confined spaces and follow required protocols to ensure safety in these areas. Our training includes OSHA compliance consulting and site-specific safety programs to help you better understand the space you’re working in and follow required safety regulations.
For emergency response planning, hazard assessments, industrial safety training, and more, contact AOTC to learn more about scheduling a confined space training program for your business. We can help you gain OSHA compliance certification and learn the skills needed to stay safe in a confined workspace. Trust us as an experienced Confined Space Training Partner in Jacksonville, Titusville, Tampa, Newberry, FL, and Macon, GA.

